E60 530d Auto 5th gear issue

Discussion in '5 Series' started by James149, Oct 6, 2026.

  1. James149
    Offline

    James149

    Joined:
    Oct 6, 2026
    Messages:
    10
    Likes Received:
    3
    Location:
    Southampton
    Ratings:
    +3 / 0 / -0
    Before I left on an overseas job my 2005 E60 530d started to jerk in 5th gear. It's an auto box that was serviced 2 months after I bought the car. The first time it happened I had joined the M3 heading home and when I gave it some beans I had a transmission warning. A mate scanned it and it showed a 4F85 ratio monitoring error Clutch E. He reset the code but while there is no new transmission warning, I get the jerking in 5th.

    I was following a post on Forum 5, but that forum disappeared while I was away. I wish I had copied the information but I didn't.

    I'm hoping it isn't something terminal. Any way of getting an online copy of the Forum 5 post?
     
  2. Stephen
    Online

    Stephen

    Joined:
    Aug 8, 2026
    Messages:
    17
    Likes Received:
    12
    Location:
    Carlisle
    Ratings:
    +14 / 0 / -0
    Try selecting the gears manually to see if the same jerking is happening, top gear or overdrive comes in when the torque converter clutch locks in, so there's no slip from the engine to the road wheels, also check the transmission fluid level, seeing the numerous transmission clutches are activated by hydraulic pressure.
     
    • Like Like x 1
  3. James149
    Offline

    James149

    Joined:
    Oct 6, 2026
    Messages:
    10
    Likes Received:
    3
    Location:
    Southampton
    Ratings:
    +3 / 0 / -0
    I have tried changing gears manually and it's the same. It jerks in 5th but stops when I shift to 4th or 6th. The fluid level is fine
     
  4. norseman
    Offline

    norseman

    Joined:
    Jul 20, 2026
    Messages:
    64
    Likes Received:
    27
    Location:
    Essex UK
    Ratings:
    +34 / 0 / -0
    I take it you mean 4th or 3rd ?
    I wonder what the 'service' entailed.
     
    • Like Like x 1
  5. James149
    Offline

    James149

    Joined:
    Oct 6, 2026
    Messages:
    10
    Likes Received:
    3
    Location:
    Southampton
    Ratings:
    +3 / 0 / -0
    No, from what I have read the e clutch is for 4th 5th and 6th. The service was new pan and filter, new bridge seal and mechatronic sleeves, and then new fluid about 7 litres in total.
     
  6. norseman
    Offline

    norseman

    Joined:
    Jul 20, 2026
    Messages:
    64
    Likes Received:
    27
    Location:
    Essex UK
    Ratings:
    +34 / 0 / -0
    My apologies, I thought it was a typo as I misread your OP & assumed the car had a 5 speed 'box.
    The service seems pretty comprehensive though I'm not an expert .. hope others here can be more helpful & you get the problem sorted.
     
    • Like Like x 1
  7. James149
    Offline

    James149

    Joined:
    Oct 6, 2026
    Messages:
    10
    Likes Received:
    3
    Location:
    Southampton
    Ratings:
    +3 / 0 / -0
    No apologies needed thanks for the reply.
     
    • Like Like x 1
  8. Alan Gunn
    Offline

    Alan Gunn

    Joined:
    Feb 13, 2018
    Messages:
    500
    Likes Received:
    145
    Location:
    Anglesey
    Ratings:
    +252 / 0 / -1
    Had an issue some years ago with a vibration but mine was at a steady speed and was told the lockup clutch was the problem.
    To confirm this i tried some "DrTranny" a small tube of a snake oil type but after about 100 miles it stopper the vibration so confirmed the clutches so i fitted a new TC.
     
    • Like Like x 1
  9. James149
    Offline

    James149

    Joined:
    Oct 6, 2026
    Messages:
    10
    Likes Received:
    3
    Location:
    Southampton
    Ratings:
    +3 / 0 / -0
    Mine is more than a vibration it is like a stutter as if there is a loss of power. Sometimes it is audible like a chatter. It is driving me mad.
     
  10. JasonH
    Offline

    JasonH

    Joined:
    Sep 1, 2015
    Messages:
    378
    Likes Received:
    112
    Ratings:
    +208 / 0 / -2
    The ratio monitoring means it's slipping in that gear.
    It probably is the clutch for that gear unfortunately which means a complete gearbox rebuild, or fit a secondhand gearbox (much cheaper).

    There are a few things to check first:

    Was Lifeguard6 oil used for the fluid change, or at the very least a highly reputable equivalent?

    Is the gearbox oil level correct? It has to be checked with the engine running, perfectly level and within a very tight gearbox oil temperature range (40C to 50C from memory).

    Finally you could try replacing all the solenoids. You'd have to change the oil again and depending on how new the sump is, probably the sump too. There is a chance the solenoid valve for that gear is failing.
     
    • Like Like x 1
  11. JasonH
    Offline

    JasonH

    Joined:
    Sep 1, 2015
    Messages:
    378
    Likes Received:
    112
    Ratings:
    +208 / 0 / -2
    There is one other cheap thing to try. After checking which oil was used and that it's the correct level, you could reset the gearbox adaptions.
    There's a ridiculous procedure to follow after doing this involving things like accelerating to 70mph and coasting down to 30mph multiple times. I did this exactly and the gear changes were rubbish. I reset again and just drove very smoothly for at least 10 miles and it worked.
    I believe the adaptations are more to learn the clutch wear for gear changes but it might help.
     
    • Like Like x 1
  12. James149
    Offline

    James149

    Joined:
    Oct 6, 2026
    Messages:
    10
    Likes Received:
    3
    Location:
    Southampton
    Ratings:
    +3 / 0 / -0
    Thanks for the reply. The box was serviced using Lifeguard 6 and a ZF pan filter. I recently checked the fluid level and it is okay. I ran the engine for a time and manually went through the gears until it reached temperature. I opened the filler port after burning my arm and a slow trickle started. Stupid place for the filler port :x

    I wish I could access the old post on Forum 5. It gave some great information about the clutches and solenoids. The one thing that sticks in my mind is that it cannot be a clutch E failure because I can use 4th and 6th gears without any problems. If clutch E has failed I would lose 4th 5th and 6th.

    I wonder if some of the old Forum 5 members that have joined here can remember who it was. I feel such a fool, but I didn't expect that forum to disappear :weep:
     
  13. JasonH
    Offline

    JasonH

    Joined:
    Sep 1, 2015
    Messages:
    378
    Likes Received:
    112
    Ratings:
    +208 / 0 / -2
    These might help. I have the repair manual as well but it's too large to add here.
     

    Attached Files:

    • Like Like x 1
  14. James149
    Offline

    James149

    Joined:
    Oct 6, 2026
    Messages:
    10
    Likes Received:
    3
    Location:
    Southampton
    Ratings:
    +3 / 0 / -0
    Thanks, that will give me something to read. The jaguar PDF loaded but the second two were blank.
     
  15. JasonH
    Offline

    JasonH

    Joined:
    Sep 1, 2015
    Messages:
    378
    Likes Received:
    112
    Ratings:
    +208 / 0 / -2
    Try the second two again. They seem to be there when I download them from the forum. The file sizes look correct too.
     
  16. markyboyt
    Offline

    markyboyt WARLORD

    Joined:
    Aug 16, 2015
    Messages:
    1,279
    Likes Received:
    294
    Location:
    Shropshire
    Ratings:
    +510 / 1 / -0
    When you say you ran the engine for a bit and shifted the gears up to temp was this monitoring the oil temp up to the correct temp of 40 degrees? I presume that’s what you meant but made me question.
    Do you know what the magnets and oil were like when the gearbox service was done?
    If oil level is good then definitely worth a reset of the adaptions and adaption run.
    Ratio monitoring type faults are usually worn components in the box requiring replacement though.
     
    • Like Like x 1
  17. GoNz0
    Offline

    GoNz0 Site Supporter

    Joined:
    Aug 18, 2015
    Messages:
    42
    Likes Received:
    15
    Location:
    Derby
    Ratings:
    +21 / 1 / -0
    Did you check with the engine running?
     
    • Like Like x 1
  18. James149
    Offline

    James149

    Joined:
    Oct 6, 2026
    Messages:
    10
    Likes Received:
    3
    Location:
    Southampton
    Ratings:
    +3 / 0 / -0
    The magnets were clear with no signs of filings. The fluid was dirty but not too bad. I expected a thick black syrup.

    I'm not sure what could be worn that could only affect 5th gear. Perhaps a solenoid.
     
  19. James149
    Offline

    James149

    Joined:
    Oct 6, 2026
    Messages:
    10
    Likes Received:
    3
    Location:
    Southampton
    Ratings:
    +3 / 0 / -0
    I did have the engine running to get to the temperature before loosening the fill port.
     

Share This Page