630 GT cold weather issues?

Discussion in '6 Series' started by Paul Markwick, Jan 4, 2022.

  1. Paul Markwick
    Offline

    Paul Markwick

    Joined:
    Nov 26, 2021
    Messages:
    165
    Likes Received:
    51
    Ratings:
    +61 / 0 / -0
    When you say code it, what does this mean?
     
  2. bmwzoom
    Offline

    bmwzoom WARLORD

    Joined:
    Sep 5, 2015
    Messages:
    1,084
    Likes Received:
    251
    Location:
    Essex
    Ratings:
    +426 / 1 / -3

    You can plug in with the correct equipment and code certain functions on/off etc like stop start, folding mirrors, auto tail gate closing etc
     
  3. Adie
    Offline

    Adie WARLORD Site Supporter

    Joined:
    Jan 15, 2016
    Messages:
    1,767
    Likes Received:
    522
    Ratings:
    +1,120 / 1 / -1
    Many have tried but with no success... both here and in the States including recognised tuning co's

    EDIT: To correct my earlier post #7 on startup the engine defaults to 'Efficient' but steering and suspension both default to Sport instead of Comfort. It's these steering and suspension defaults that no one has figured out how to change. Most people including myself set the M1 memory button to Efficient/Comfort/Comfort
     
    Last edited: Jan 10, 2022
  4. Paul Markwick
    Offline

    Paul Markwick

    Joined:
    Nov 26, 2021
    Messages:
    165
    Likes Received:
    51
    Ratings:
    +61 / 0 / -0
    OK, understand. Many thanks
     
  5. mach one
    Offline

    mach one WARLORD

    Joined:
    Feb 6, 2016
    Messages:
    2,900
    Likes Received:
    1,164
    Ratings:
    +2,040 / 1 / -6
    what is the default on start mode for your car

    the 640i 6GT was always in comfort on start so l would run the car up to temperature before switching to sport. l don't think l ever put the car in Eco plus ever but used sport very occasionally
     
  6. Paul Markwick
    Offline

    Paul Markwick

    Joined:
    Nov 26, 2021
    Messages:
    165
    Likes Received:
    51
    Ratings:
    +61 / 0 / -0
    Update on the above.
    I took the car into the dealer yesterday. Ambient was 3c when I started. Unable to select driving mode.
    Dealer (Rybrook) couldn't replicate the problem yesterday, so kept the car overnight.
    1c this morning and no fault found. They have done a software update, and asked me to monitor.
    I'm not confident that this issue is fixed. It is not a disaster, but irritating. I like the Economy mode when it is icy, as you have less chance of wheel slip under throttle.
    They have reprogrammed the MoT due date, as this was wrong.

    Jury out but I'm not confident.
     
  7. edthefed
    Offline

    edthefed

    Joined:
    Sep 19, 2015
    Messages:
    979
    Likes Received:
    378
    Ratings:
    +737 / 1 / -2
    Paul,

    Perhaps worth trying to video what happens and then show it to the dealer...ask if you can speak to the "Master / senior technician" and show him. Ive done this on a couple of occasions
     
  8. Paul Markwick
    Offline

    Paul Markwick

    Joined:
    Nov 26, 2021
    Messages:
    165
    Likes Received:
    51
    Ratings:
    +61 / 0 / -0
    Thanks, yes I did see the Senior Techie. He's a good sort, and been receptive in the past. Good suggestion with the video, however, there really isn't much to show? I try to select the mode, and get no response. Will just have to monitor for now. in reality, the ambient will warm up soon, and it won'tbe a problem..........until next winter.......when the car will be out of warranty.
     
  9. edthefed
    Offline

    edthefed

    Joined:
    Sep 19, 2015
    Messages:
    979
    Likes Received:
    378
    Ratings:
    +737 / 1 / -2
    I would do a video showing
    Sitting in drivers seat
    Pressing ignition (and what is on the dashboard / i drive
    Trying to select economy mode and not being able to
    Whilst doing that video the I drive and dashboard lights again

    It will show there is a problem and that you have reported it to the dealership within warranty and they are unable to resolve it
    Also ask them to raise it an issue with BMW technical in Germany
     
    • Like Like x 1
    • Agree Agree x 1
  10. Paul Markwick
    Offline

    Paul Markwick

    Joined:
    Nov 26, 2021
    Messages:
    165
    Likes Received:
    51
    Ratings:
    +61 / 0 / -0
    Good advice, thank you
     
  11. Paul Markwick
    Offline

    Paul Markwick

    Joined:
    Nov 26, 2021
    Messages:
    165
    Likes Received:
    51
    Ratings:
    +61 / 0 / -0
    Tested this morning at 2C. Selector worked as normal. Maybe the software/firmware update has done the trick?
     
    • Like Like x 2
    • Agree Agree x 1

Share This Page